licheepi-4a
Documentation Technical support SD writing tool Rigil Kent

Sipeed
Community maintained

What Does Community Support Mean?

Community maintained boards are not officially supported by the Armbian project. These boards are maintained (or not maintained) by community members (like you). These builds are provided by the Armbian project as a service to the community. They are automatically generated and untested!

Support dropped due to security reasons:

1. Download u-boot files for Armbian

Download the u-boot file for the corresponding memory version of LicheePi 4A from the Action or Releases section of chainsx/thead-u-boot.

2. Flash u-boot to EMMC (required)

If there is a DIP switch, set it to EMMC mode. Press the BOOT button on the board and connect lpi4a to the computer using a data cable. Then perform the following operations:

sudo fastboot flash ram ./firmware/u-boot-with-spl.bin
sudo fastboot reboot
sleep 10
sudo fastboot flash uboot ./firmware/u-boot-with-spl.bin

For installation of drivers, refer to the Sipeed official Wiki.

3. Flash the system

Option 1: Flash the system to an SD card

You can use Etcher or other software.

Option 2: Flash the system to EMMC

(1) Use the UMS (USB Mass Storage) feature of u-boot (experimental):

Interrupt the u-boot countdown by pressing `Ctrl^C` when counting down using the serial port to enter the u-boot command line, then enter the following command:

ums 0 mmc 0

The EMMC will be mapped as a USB Mass Storage device on the computer, and you can use Etcher or other software to flash it.

(2) After booting from the SD card, use the dd command to copy the Armbian image to the EMMC.

4. Support status

It is recommended to use the legacy version based on T-Head SDK.

5. For 16GB version

First, you need to flash 16GB u-boot.
Second, you need to change “th1520-lichee-pi-4a.dts” to “th1520-lichee-pi-4a-16gb.dts” in /boot/extlinux/extlinux.conf.

Become a partner and support development!

Specifications

* Specifications differ from hardware revision, model and software support level

FAQs

  • check previous images from archive
  • join community forums

Simple

BASH or ZSH shell, standard Debian/Ubuntu utilities. Features can be adjusted with menu-driven utility. Login is possible via serial, HDMI or SSH.

Universal

Minimal, server or Desktop. We work with XFCE, Gnome and Cinnamon but more is possible to build: Mate, KDE, Budgie, Deepin, i3, …

Light

No bloatware or spyware. Special utilities are completely optional. Suitable for newcomers and professionals.

Optimized

Distributed images are optimized for flash media (SD/eMMC/SSD) and compacted to real data size.

Fast

Armbian is optimized on kernel and userspace level. ZRAM & ZSWAP support, browser profile memory caching, garbage commit delay.

Secure

Security level can be adjusted with the armbian-config. OS is reviewed by professionals within the community.

Supported

Maintainers and community have deep understanding how HW work. We are seniors with 30+ years of experience in Linux + embedded Linux.

Open

Armbian provides open source build framework to build a distribution of optimised Linux hardware interface for armhf, aarch64 and x86.

We provide a selection of images that fits hardware best. If you need different image – use build framework and make whatever you need. Build framework relies on Debian and Ubuntu packages – you can build any combination – stable, old stable or rolling release.

Minimal images have very small footprint. They come only with essential packages and build-in systemd-networkd while CLI server images have Network Manager based networking, armbian-config utilities, option to select ZSH as default shell.

Make sure you have a good & reliable boot media (SD card / USB key) and a proper power supply. Archives can be flashed with Etcher (all OS) directly.

Insert the SD card into the slot, connect a cable to your network if possible or a display and power your board. (First) boot (with DHCP) takes a bit longer.

Support is provided in one of two ways:

Current images doesn't work? Use old images from archive and report to forums exactly which image fails.